You are here: LITTERS > Medevac (402) > Frame Cover Replacement

Frame Cover Replacement

Replace frame cover as follows:

NOTE

Refer to Table 1 for ordering of frame cover.

Removal of Nylon Frame Cover

  1. Assemble MEDEVAC Litter.
  2. Turn MEDEVAC Litter so that skid rails are facing up.
  3. Remove bottom flotation pad.
  4. Disconnect all nylon frame cover retaining straps.
  5. Ensure all personnel retaining straps are disconnected and spread out.
  6. Remove all cross connecter bracket retaining self locking nuts and bolts.
  7. Disconnect and remove coupler then fold litter so nylon cover can be removed.

Installation of Nylon Frame Cover

  1. Fold litter frame assembly and position nylon frame cover on frame.
  2. Unfold litter and install locking couplers.
  3. Turn MEDEVAC Litter so that skid rails are facing up.
  4. Install all cross connecter bracket retaining self locking nuts and bolts.
  5. Connect all nylon frame cover retaining straps.
  6. Install bottom flotation pad.
  7. Fold and stow litter and accessories in carrying case.